Analogue Audio

Audiophile quality components for best sound quality
Multi-channel 7.1 analogue input for DVD-A or SACD sources
Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)
Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
Zone 3 stereo audio, from analogue inputs, linked to Zone 2, volume control independent
Support for iPod via Arcam rLead / rDock (independent of RS232 connection)
Digital Audio

State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding
Wolfson 8471 high end 24bit 192kHz audio DACs
Crystal Semiconductor stereo ADC and precision electronic volume controls
Burr Brown DRV134 Balanced line drivers
Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*
DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**
Dolby Volume gain management and Tonal correction processing*
Dolby Volume processing for balancing of program material gain and tonal balance
Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources with auto lip-sync for compatible displays
Video

5 HDMI inputs (up to 1080p, Deep Colour)
2 HDMI outputs (up to 1080p, Deep Colour)
5 Component inputs, one monitor output (up to 1080i)
5 S-video inputs, one monitor output, 2 tape outputs
5 Composite video inputs, one monitor output, 2 tape outputs
Full video up/down conversion & frame rate conversion of all inputs where technically allowed
Video enhancements (per input): Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction
Custom Install Features

Independent Zone 2 (audio & video), with fixed/variable volume
Zone 3 audio with fixed/variable volume (follows Zone 2)
Balanced audio outputs (XLR) for long cables or active speakers
RC-5 remote input jacks for all three zones
IP control over Ethernet
IR pass through for source components
Full suite of discrete IR RC-5 codes, including separate on / off etc
12Volt triggers, on / off for zones 1, 2 and 3
Full duplex RS232 control input for more complex control systems
Audio streaming and Internet radio via Ethernet port
General

Supplied with back-lit CR102 learning remote
control with support for up to 7 other components and a huge on-board code library
Large, high contrast dimmable VFD front panel display
User switchable between 120 & 230 volt
mains supplies
Size – 435mm (17.1in) wide, 415mm (16.3in)
deep, 185mm (7.3in) high
Weight 12kg (26.5lbs) nett, 17kg (37.5lbs) packed

Analogue Audio

120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz)
Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz
Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material
In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2
Audiophile quality components for best sound quality
Multi-channel 7.1 analogue input for DVD-A or SACD sources
Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)
Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
Zone 3 stereo audio, from analogue inputs
Linked to Zone 2, volume control independent
DAB/FM/AM or FM/AM stereo tuner with 50 presets
Sirius Home Connect compatible input
Support for iPod via Arcam rLead / rDock (independent of RS232 connection)
Digital Audio

State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding
Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls
Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master
Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6
Dolby Volume processing for balancing of program material gain and tonal balance
Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources
USB input for audio file playback from UPnP mass storage devices
Ethernet connection for Internet Radio and audio streaming
Video

5 HDMI inputs (up to 1080p, Deep Colour)
2 HDMI outputs (up to 1080p, Deep Colour)
5 Component inputs, one monitor output (up to 1080i)
5 S-video inputs, one monitor output, 2 tape outputs
5 Composite video inputs, one monitor output, 2 tape outputs
Full video up/down conversion & frame rate conversion of all inputs where technically allowed
Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction
Custom Install Features

Independent Zone 2 (audio & video), with fixed/variable volume
Zone 3 audio with fixed/variable volume
RC-5 remote input jacks for all three zones
IR pass through for source components
Full suite of discrete IR RC-5 codes, including separate on / off etc
12Volt triggers, on / off for zones 1, 2 and 3
Full duplex RS232 control input for more complex control systems
Ethernet connection for IP control
General

Supplied with back-lit CR102 learning remote
control with support for up to 7 other
components and a huge on-board code
library
Large, high contrast dimmable VFD front
panel display
User switchable between 120 & 230Volt
mains supplies
Size – 435mm (17.1in) wide, 435mm (17.1in)
deep, 185mm (7.3in) high
Weight 25kg nett, 30kg packed

Audio

7 x 150 watts per channel (8 ohms, 20Hz-20kHz, all channels driven)
7 x 230 watts per channel (4 ohms, 20Hz-20kHz, all channels driven)
Peak output current +/- 30amps per channel
Modular construction with seven independent and fully isolated channels
Four Sanken heavy duty bi-polar output transistors per channel
Advanced current feedback design with high slew rate and very low distortion at all audio frequencies
Predominantly aluminium chassis and casework for best sound quality
Comprehensive protection circuitry
- DC offset protection
- VI limiting on each output stage
- Software controlled thermostatic fan
- Over temperature protection
Inputs and Outputs

Balanced (XLR) input connections
Unbalanced (RCA) inputs with “loop through” output
12v Trigger (3.5mm mono jack) input for standby control
Power Supply Features

Balanced (XLR) input connections
Twin 1500 VA toroidal power transformers with separate secondary’s for each power amplifier
Separate low noise toroid transformer for standby operation
140,000 micro-farads total reservoir capacitance
“Soft Start” turn on system to prevent large inrush currents
Custom Install Features

12v trigger input (3.5mm)
Heavy duty IEC power inlet
Middle Atlantic rack shelf available
Balanced and unbalanced inputs
Unbalanced input “loop though” connection
Large and quiet temperature controlled fan
General

Available in black or silver finish
Size – 435mm (17.1in) wide, 460mm (18.1in)
deep, 185mm (7.3in) high
Weight 31kg (68.3) nett, 35kg (81.6lbs) packed

For example, you can route the audio signal via the network jack for streaming music from your PC or Internet radio. Alternatively, you can route it via one of the six HDMI1.4a inputs, one of which is hidden behind the front flap for easy access. Here you can also find the iPod-digital-compatible USB input and a second double line display, which complements the famous elegant circular display with more detailed information. The AV7005 also takes supreme care of 3D video signals, even in stand-by mode, and sends them to the two HDMI1.4a output sockets. And there is even a Phono MM input – ideal for those precious vinyls. It supports all the latest sound formats including Audyssey DSX by using the Sharc 32Bit signal processor from Analog Devices, also for handling the MultEQ XT auto calibration. It’s all there, just waiting to perform.

There?s also support for Deep Color and 24fps with four HDMI version 1.3a inputs and two outputs. Legacy designs get the High Definition treatment too, with the AV8003 incorporating Marantz?s first built-in video scaler from Anchor Bay for enhanced video performance, with upconversion and scaling to 1080p from all analogue and digital sources. The THX Ultra2-certified AV8003 goes even further: movie and music files stored on a PC or network get the same HD treatment thanks to a built-in digital media player which streams audio and video content throughout a networked home. The AV8003 can then fire this all over the home, including high definition video via HDMI for the main viewing room, component video to the second room, with third room independent audio capability. Even your digital audio in MP3, WAV or AAC format will sound as originally recorded thanks to the build-in Marantz Digital Audio Expander. The Digital Audio Expander, also called MDAX, recalculates the outputted frequency range of any audio signal and expands it over a broader frequency range. This enables you to get detailed and clearer sound even out of compressed audio files. For total connectivity and flexibility, the AV8003 features eight balanced outputs for ultra low noise connection to the power amp (even over long cable runs), two balanced inputs to connect a high-end CD source, RS-232c, direct IR inputs and DC triggers. Completing the package is a programmable, backlit LCD remote control, as well as an additional handset for second room use. Such outstanding attention to detail continues with the metal, reference-standard M1 chassis, which employs a heavy bottom plate to virtually eliminate sound-degrading vibration. The case is even completely copper-plated for perfect grounding and to guard against electrical interference. The result is a model delivering clean, minimalist lines to match its pure sound.

THX Ultra 2 certified 7.1-channel AV pre-amplifier
Dolby TrueHD, DTS-HD
M-DAX for compressed audio (MP3, WMA, iPod)
Network streaming for audio and video (supporting DLNA).
HDMI Version 1.3a: 4in / 2out
Video scaler up to 1080p
Auto Lip sync
XLR audio inputs for SACD Player
XLR Pre Output Terminals
Copper plated chassis
Toroidal Transformer
Multi-room/multi-source
Including RC2001 PC programmable remote control unit

Use it in an AV setup to give your front channels an earth-moving boost or simply to make a sensational upgrade to an existing stereo system. And, because the technology is the same as that in the MM7055 and MM8003 using them in combination is fast, efficient and friendly. It’s a great flexible customisation enabler. And, as with the big brother MM7055, it also includes a new stylish display, XLR inputs, DC triggers and Marantz bus.

Based on the technology used in the MM8003 and using the exact same chassis, it delivers a thumping 140W rms into 8 ohm to each of the channels, while the ultra-wide bandwidth current feedback technology easily handles the highest SACD frequencies – this also makes it ideal for the high definition DTS Master Audio and Dolby TrueHD formats too. The result? Totally precise tonal and image balance, speed and dynamics. And on top of all that, you also get XLR audio inputs, DC triggers and a Marantz control bus system for remote on/off. There’s even a stylish new display screen showing the actual output power. This is power and convenience to take your breath away.

This works alongside custom filter capacitors, high grade audio components throughout, extensive shielding of key components, and ultra-wide bandwidth current feedback technology. The latter amplification system was originally developed for Super Audio CD signals and is ideal for the new DTS-HD Master Audio and Dolby True HD formats. The result of all this technology is an unerringly accurate tonal and image balance, allied to speed and dynamics with very low distortion. Combining with this great sound is outstanding flexibility, such as eight channels, balanced input terminals, output channel relay on/off control and a slow start to power-on function. The MM8003 is built on a rigid full metal chassis which virtually eliminates any sound degrading vibration. Again, this is completely copper-plated delivering perfect grounding and guards against electrical interference.

8-channel power amplifier delivering 140Watts (8 ohms)
Low impedance continuous drive capability at 4 ohms
New solid reference standard design
Current feedback amplifier circuit for fast and accurate signal handling
Marantz-designed storage capacitors for quick response to rapidly varying sources
Huge shielded toroidal transformer for instant current delivery capability
Rigid copper plated chassis for lowest impedance grounding at any point
Large aluminum extrusion heat sinks
Clever cooling system
Gold plated speaker terminals
DC trigger control inputs, DC power status outputs and IR Flasher input terminals for system integration
Slow start to Power on
Detachable power cord
Output channel relay On/Off; 8 speaker terminals can be split in 4x 2output relays controllable by remote signal (for multi zone use)
Matching AV8003 pre-amplifier

It nicely fits to the Marantz DVD player or even to a Marantz Blu-ray player as it has decoders for standard resolution and high definition audio like DTS-HD and Dolby TrueHD on board. Video signals connected analogue will be converted to HDMI and for digital sources 4 HDMI 1.3a inputs are available. Hook up the satellite box, your VCR, the DVD, game console or your camcorder and don?t worry which input you have to choose on the TV. The NR1501 will handle all. With the OSD menu and the MRAC auto setup using a microphone the installation is even for the none-technical user quite simple. That?s Marantz combination of sound, design and ease of use.

7.1-channel AV receiverin slim height cabinet
7x 50 Watts RMS
Dolby TrueHD, DD+, DTS-HD
Automatic speaker setup by MRAC
Built-in FM/AM tuner with RDS
HDMI v1.3 - 4in / 1out

The set-up is easy - with the help of Audyssey MultEQ and Microphone - no need to study the manual, just follow the on-screen menu instructions. And, just like its bigger brothers, the NR1601 has an iPod-digital-compatible USB input, as well as an M-DAX2 to make the very most of sound quality from compressed audio. It all adds up to easy to use slim-line elegance with a powerful punch.

To ensure you get the best possible audio from compressed files on iPod via USB, the SR5005 incorporates the M-DAX2 – Marantz Dynamic Expander version2. This neat little addition also optimises the quality of MP3 files from either CD or the optional Bluetooth receiver RX101. Everything sounds clearer, more detailed, and more alive. To finish off, the SR5005 comes with a whole host of convenience features such as “auto set-up” with Audyssey MultiEQ and Dynamic Volume, multiroom with multi-source flexibility, and “video-off” mode to ensure you enjoy your movies and music in true dynamic Marantz style. What’s more all analogue and HDMI video sources can be up-scaled to 1080p via the Anchor Bay ABT1030 processor.

In addition, the system’s Dynamic Volume control ensures that the sound remains the same level even when a commercial interrupts. Also, the video up-scaling of analogue and digital video signals up to 1080p – by the famous Anchor Bay ABT2015 – avoids the necessity of selecting the right input on the TV: once it is set-up, the SR6005 automatically makes the right connection. In addition, for ‘new media’ the SR6005 includes an iPod-digital-compatible USB input behind the front flap, and for Bluetooth devices such as a PC or mobile phone the receiver is ready with the optional RX101. What’s more, set-up, optimisation and operation are all quick and easy – with the Audyssey MultEQ and intuitive to use graphic user interface. Pure enjoyment has never been easier.

The “brain” of the system is the latest 400Mhz Sharc DSP, which easily handles HD audio decoding including the Audyssey DSX and the MultEQ XT room calibration. The source signal can be either digital or analogue, and it can also be from a wide variety of inputs. First of all, via the six HDMI 1.4a inputs, one of which is hidden behind the front flap for easy access. For new media there is a iPod-digital-compatible USB input, while the RJ45 Network jack provides connection to vTuner Internet radio and music services such as Napster and last.fm. You can even access your music library stored on computer . Classical analogue signals will come from the built-in FM tuner or via either the analogue input jacks or the Phono equalizer: which is ideal for vinyls. Video signals are also treated with loving care by ABT2015 video processing, a host of video adjustment possibilities and two HDMI 1.4a outputs supporting 3D video. It’s all there, eager to please.